Filter
Top Products
Safety notices
1-2 DocuTech 61xx Operator Guide
Ozone safety
This product produces ozone during normal operation. The
ozone produced is dependent on copy volume and is heavier
than air. Providing the proper environmental parameters as
specified in the Xerox installation instructions ensures that
concentration levels meet safe limits.
Operation safety
Your Xerox equipment and supplies have been designed and
tested to meet strict safety requirements. These include safety
agency examination and approval, and compliance to
established environmental standards. Attention to the following
notes ensures the continued safe operation of your equipment.
• The system is heavy. Ensure that the floor is level and strong
enough to support the weight of the system.
• Do not place the system near a heat source.
• To move the system, call a Service Representative.
• Do not use an extension cord. Always connect the system
power cable to a properly grounded power source receptacle.
If in doubt, have the receptacle checked by a qualified
electrician.
• Do not use an adaptor plug to connect the system to an
electrical outlet that lacks a ground connection terminal.
WARNING
Improper connection of the equipment grounding conductor
can result in risk of electrical shock.
• Do not locate the system where people may walk on the
system power cable. Do not place objects on the system
power cable.
• Never override or disable electrical or mechanical interlocks.