Filter
Top Products
Technical information
DocuTech 61xx Operator Guide 7-9
Weight Substance 16 to 110 (60 to
200 g/m2)
Weights outside the limits
shown are not
recommended.
Substance 110 (200 g/m2)
must be long grain except 17
x 11 inch (432 x 279 mm)
substance 110 (200 g/m2)
which must be short grain.
Capacity 2600 sheets, substance
20 (75 g/m2)
Type or
condition
Xerographic bond paper in
good condition
Drilled stock, fanned
thoroughly
Slightly curled paper
Intermixed weights
Xerox vellum
Full cut tabs
Label stock
Adhesive drafting film
Paper with reinforced edges
Do not use excessively
curled paper
Substance 110 (200 g/m2)
must be long grain. Do not
use short grain.
Precut tabs - use tray 1 or 2.
Transparencies with a white
stripe, use tray 1 or 2.
Freshly printed offset prints,
use tray 3.
Refer to the “Using various
stocks” section for any stock
not defined in this guide.
Table 7-7. Satisfaction guide for paper tray 4
Stock
Reliable feeds may be
expected
Less reliable feeds may be
expected Suggested alternatives
Size 8 x 10 inches to 17 x 11
inches (203 x 254 mm to
432 x 279 mm)
Smaller or larger sizes
cannot be used.
Weight Substance 16 to 110 (60 to
200 g/m2)
Weights outside the limits
shown are not
recommended.
Substance 110 (200 g/m2)
must be long grain except 17
x 11 inch (432 x 279 mm)
substance 110 (200 g/m2)
which must be short grain.
Capacity 550 sheets, substance 20
(75 g/m2)
Table 7-6. Satisfaction guide for paper tray 3
Stock
Reliable feeds may be
expected
Less reliable feeds may be
expected Suggested alternatives