Filter
Top Products
Technical information
7-18 DocuTech 61xx Operator Guide
Set size limits Maximum collated:
125 sheets of substance
20 (75 g/m2) or equivalent
thickness
Minimum collated:
15 sheets of substance 20
(75 g/m2) (7 sheets with
index covers) or
equivalent thickness
Maximum uncollated:
100 sheets of substance
20 (75 g/m2)
Minimum uncollated:
15 sheets of substance 20
(75 g/m2) (7 sheets with
index covers) or
equivalent thickness
125 sheets of substance 16
(60 g/m2)
Consider stitching for set sizes
smaller than 15 sheets (or
equivalent thickness).
Reduce the number of sheets
to maintain a maximum set
thickness of 0.5 inch (13 mm)
when using heavier than
substance 20 (75 g/m2) for
main body or inserts.
Stacker
capacity
Delivers 12 sets inboard
and 12 sets outboard
To allow continuous run,
unload outer stack before
inner stack reaches capacity.
Type or
condition
Xerographic bond paper in
good condition
Drilled paper
Slightly curled paper Avoid the following:
• Coated papers
• Drilled stock with
reinforced edges
• Transparencies as inserts
• Excessively curled paper
• Never-tear paper
Stock not defined here is
included in the “Using various
stocks” section in this guide.
Table 7-16. Top tray satisfaction guide
Stock
Reliable stacking may be
expected
Less reliable stacking may
be expected Suggested alternatives
Size 8 x 10 inches to 11 x 17
inches (203 x 254 mm to
279 x 432 mm)
Intermixed sizes Smaller or larger sizes cannot
be used.
Table 7-15. Binder satisfaction guide
Stock
Reliable stacking may be
expected
Less reliable stacking may
be expected Suggested alternatives