Filter
Top Products
Technical information
7-20 DocuTech 61xx Operator Guide
With the introduction of other DFA-complaint finishing devices for
use with the DocuTech 61xx family of printers, additional paper
stock sizes can be handled by the finishing devices, both straight
from the Bypass Transport or rotated.
Limitations
Do not rotate paper sizes that will not fit through the DocuTech
61xx Bypass Transport to a third party finishing device.
Before creating a document to be rotated by the Bypass
Transport, set the paper stock size required to fit within the
limitations detailed in the following tables and as follows:
• The diagonal dimension of the paper stock must be equal to
or less than 18 inches (457 mm).
• The paper stock must be within the paper stock size
parameters of the DocuTech 61xx printer paper trays.
Refer to the DocuSP controller on-line help system for
information on setting finisher devices and finisher profiles to
enable rotation to a third party finisher.
Table 7-17. Common US paper sizes
Common size
name
Inches x
inches
Millimeter
equivalent
Diagonal in
inches
Can be
rotated
Comment
(similar to or
the same as)
8.0 x 10.75 203 x 273 13.40 YES
US Letter/ US
A-size
8.5 x 11.0 216 x 279 13.90 YES 2-up of US 5.5
x 8.5 in.
(statement)
9.0 x 12.0 229 x 305 15.00 YES 2-up of US 6.0
x 9.0 in.
(common
“book” size)
US Legal 8.5 x 14.0 216 x 356 16.38 YES ISO Foolscap
9.0 x 14.0 229 x 356 16.64 YES 2-up of US 7.0
x 9.0 in.
9.0 x 15.0 229 x 381 17.49 NO* 2-up of US 7.5
x 9.0 in.
10.5 x 14.5 267 x 368 17.90 NO* 2-up of US
7.25 X 10.5 in.
(Executive)
US Ledger/
US B-Size
11.0 x 17.0 279 x 432 20.25 NO 2-up of US 8.5
x 11.0 in.
(Letter)