Filter
Top Products
Technical information
7-8 DocuTech 61xx Operator Guide
Stock satisfaction guides
Table 7-5. Satisfaction guide for paper trays 1 and 2
Stock
Reliable feeds may be
expected
Less reliable feeds may be
expected Suggested alternatives
Size 8 x 10 inches to 9 x 14
inches (203 x 254 mm to
229 x 356 mm)
Stock smaller than 8 x 10
inches cannot be used.
For stock larger than 9 x 14
inches (229 x 356 mm), refer
to the tray 3 satisfaction
guide.
Weight Substance 20 to 110 (75 to
200 g/m2)
Substance 16 to 19 (60 to 72
g/m2)
Weights outside the limits
shown are not
recommended.
Substance 110 (200 g/m2)
must be long grain. Do not
use short grain.
Capacity Tray 1 - 1100 sheets,
substance 20 (75 g/m2)
Tray 2 - 600 sheets,
substance 20 (75 g/m2)
For greater capacity, use
Tray 3.
Type or
condition
Xerographic bond paper in
good condition
Drilled stock, fanned
thoroughly
Tab stock in perfectly flat
condition
Slightly curled paper
Intermixed weights
Transparencies
Label stock
Adhesive drafting film
Paper with reinforced edges
Do not use excessively
curled paper
Substance 110 (200 g/m2)
must be long grain. Do not
use short grain.
Use transparencies with a
white stripe.
Freshly printed offset prints,
use tray 3.
Refer to the “Using various
stocks” section for any stock
not defined in this guide.
Table 7-6. Satisfaction guide for paper tray 3
Stock
Reliable feeds may be
expected
Less reliable feeds may be
expected Suggested alternatives
Size 8 x 10 inches to 17 x 11
inches (203 x 254 mm to
432 x 279 mm)
Smaller or larger sizes
cannot be used.