Filter
Top Products
Routine maintenance
DocuTech 61xx Operator Guide 5-41
Adjusting the heavy paper levers
This system can handle a variety of papers. Some heavier
weight paper or longer paper may cause skewing problems.
Adjust the heavy paper levers to prevent this skewing.
Adjust the heavy paper levers when you have skewed prints.
Perform the following steps to adjust the heavy paper levers.
1. Open the right door of the processor.
2. Open the left door of the processor.
3. Locate the black heavy paper levers behind area 4 and area
2.
4. Raise the heavy paper levers.
a. Pull the silver latch release toward you.
b. Raise the left and right black levers to the vertical position,
as shown in figure 5-43.
Figure 5-43. Raising the levers
5. Run the print job.
6. When the print job has been completed, lower the heavy
paper lever.
a. Pull the silver latch release toward you.