Filter
Top Products
Routine maintenance
5-4 DocuTech 61xx Operator Guide
2. When the green "Ready to open" light comes on, pull the tray
out until it stops.
3. Move the rear and side guides away from the paper stack, as
shown in figure 5-3.
Figure 5-3. Moving the guides
NOTE: To load the paper correctly, refer to the label located
on the inside panel at the front of the paper tray. For
information on loading different types of stock, refer to the
"Technical information" chapter in this guide. Remove any
damaged sheets from the top of the stack.
4. Load the required paper into the paper tray. Load paper with
the curl side facing down. Load Xerox paper with the
package wrapper seam side facing up.
NOTE: When loading drilled paper, be sure to fan the edge
where the holes are located.
5. Position the stack against the front left corner of the tray, as
shown in figure 5-4. This is indicated by the green arrow on
the bottom of the tray.