Filter
Top Products
5: ZXP Series Toolbox
Cleaning
P1045430-002 Zebra ZXP Series 8 Card Printer User’s Manual 119
• Front Card Path
When you Click the Clean button, instructions will appear in the following sequence:
1. Insert a Y Roller Cleaning Card in the front feed slot, and click the Clean button.
2. Wait until the cleaning process completes. The card will eject through the front
feed slot.
3. Flip the cleaning card. Insert the card through front feed slot, and click the
Clean button.
4. Wait until the cleaning process completes. The card will eject through the front
feed slot.
5. Observe the message, Front card path cleaning has been completed successfully.
6. Click the Close button to conclude the front card path cleaning process.
• Heater Rollers
When you Click the Clean button, instructions will appear in the following sequence:
1. Open the printer cover, remove the transfer film, and close the cover. Then, click the
Next button.
2. Wait until the transfer temperature falls below 70
o
C.
3. Remove the backing from the Hot Roller Cleaning Card. Insert the card in the front
feed slot, and click the Clean button.
4. Wait until the cleaning process is completed. The card will be ejected through the
front feed slot.
5. Flip the cleaning card. Insert card in the front feed slot, and click the Clean button.
6. Wait until cleaning process is completed. The card will be ejected through the front
feed slot.
7. Remove the cleaning card. Open the printer cover, and install the transfer film. Close
the printer cover, and click the Close button to complete the cleaning cycle.