Zebra Technologies 8 Printer User Manual


 
3: Operation
Operator Control Panel (OCP)
P1045430-002 Zebra ZXP Series 8 Card Printer User’s Manual 57
Printer Menu Information
Info Menu
Press the PREV button to move up the menu list
Press the
NEXT button to move down the menu list
Press the
EXIT button to return to the Operating Mode Display
PRINTER INFO
NETWORK INFO
RIBBON INFO
FILM INFO
PRINTHEAD USAGE
CONFIGURATION INFO
TEMPERATURE INFO
Displays MCB FW Ver, HCB FW Ver, MAB FW Ver, MSN (Machine Serial Number),
and PH S/N (Printhead Serial Number).
Displays DHCP, IP, Mask, GW, and MAC.
Displays Type, # Images, and % Remaining.
Displays Type, # Images, and % Remaining.
Displays Card Count and Printhead Lines.
Displays RAM, Single or Dual Sided, and Options Installed: Mag, Encoder, Laminator.
Displays Settings: Top and Bottom temperature; and Current Temperature: Top and Bottom.
INFO Button
(Operating Mode Display)
LAMINATOR INFO * Displays LCB, MAB, LSN, Top installed (yes/no), Bottom installed (yes/no).
TOP LAMINATE INFO * Displays P/N, Type, # Images, and % Remaining.
BTM LAMINATE INFO * Displays Type, # Images, and % Remaining.
LAM TEMPERATURE INFO * Displays Settings: Top and Bottom temperature; and Current: Top and Bottom temperature.
LAMINATOR ODOMETER * Displays Unit on (# days), Top on (# days), Bottom on (# days), # Laminated, # Processed.
WIRELESS INFO
WIRELESS STATISTICS
Displays Settings: SSID, Channel Noise Floor, WEP, DHCP, IP, Mask, GW, and MAC. Only applies
to Printers with the Wireless option installed.
Displays RX Bytes, Discards, TX Bytes, Discards, Errors; TX Success, TX Retry, RX Success,
RX Duplicate, and RTS Success. Only applies to Printers with the Wireless option installed.
Info Menu
PREV NEXT EXIT
Displays Card Count.REJECT BIN
CAL LUT INFO Displays Look-Up Table info for LUT1 and LUT2.
* Only applies to Printers with a Laminator.