Zebra Technologies 8 Printer User Manual


 
8: Technical Specifications
8.02.11b/g Wireless Compliance Information
P1045430-002 Zebra ZXP Series 8 Card Printer User’s Manual 161
8.02.11b/g Wireless Compliance Information
This information applies to printers that have the 8.02.11b/g wireless option installed.
Proprietary Statements
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC
rules.
WARNING: Exposure to Radio Frequency radiation. To conform to FCC RF exposure requirements this device shall be used in
accordance with the operating conditions and instructions listed in this manual.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to insure
compliance. Changes or modifications to this unit not expressly approved by Zebra Technologies Corporation could void the
user's authority to operate this equipment.
Canadian Compliance Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme á la norme NMB-003 du Canada.
"IC:" before the equipment certification number signifies that the Industry Canada technical specifications were met. It does not
guarantee that the certified product will operate to the user's satisfaction. This device complies with Industry Canada license-
exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including
interference that may cause undesired operation of the device.
NCC (Taiwan) Compliance Statement
⛫ဳᑼ⹺⻹วᩰਯૐഞ₸኿㗫㔚ᯏ㧘㕖⛫⸵น㧘౏มޔ໡⯳ᚗ૶↪⠪ဋਇᓧᠬ⥄⼠ᦝ㗫₸ޔടᄢഞ₸ᚗ⼠ᦝේ⸳⸘ਯ․ᕈ෸ഞ⢻ޕૐഞ₸኿㗫㔚ᯏਯ
૶↪ਇᓧᓇ㗀㘧⥶቟ో෸ᐓᡓวᴺㅢା㧧⛫⊔⃻᦭ᐓᡓ⃻⽎ᤨ㧘ᙥ┙හ஗↪㧘ਗᡷༀ⥋ήᐓᡓᤨᣇᓧ➊➖૶↪ޕ೨㗄วᴺㅢା㧘ᜰଐ㔚ାᴺⷙቯ૞ᬺਯ
ή✢㔚ㅢାޕૐഞ₸኿㗫㔚ᯏ㗇ᔋฃวᴺㅢାᚗᎿᬺޔ⑼ቑ㉣≮↪㔚ᵄユ኿ᕈ㔚ᯏ⸳஻ਯᐓᡓޕ
" According to "Administrative Regulations on Low Power Radio Waves Radiated Devices" Without permission granted by the
DGT, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original
characteristic as well as performance to a approved low power radio-frequency devices. The low power radio-frequency devices
shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until
no interference is achieved. The said legal communications means radio communications is operated in compliance with the
Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave
radiated devices."
Japan: Ministry of Internal Affairs and Communications (MIC) Certification
ᣣᧄ㧦 ✚ോ⋭ (MIC) ⹺⸽ࡑ࡯ࠢ
ᧄ⵾ຠߪ MIC ߩ⹺⸽ࠍฃߌߡ޿߹ߔޕ
RFID ⹺⸽⇟ภߪNo. FC-10003 ߢߔޕ
WIFI ⹺⸽⇟ภߪ 208WWW110007 ߅ࠃ߮ 208GZ110008 ߢߔޕ
ߎߩᯏེߪޔή✢๟ᵄᢙࠛࡀ࡞ࠡ࡯ࠍ↢ᚑ߅ࠃ߮૶↪ߒޔߘࠇࠄࠍ᡼኿ߔࠆน⢻ᕈ߇޽ࠅ߹ߔޕߒߚ߇ߞߡޔ࡙࡯ࠩ࡯࡮ࡑ࠾ࡘࠕ࡞ߦᓥߞߡ⸳⟎߅
ࠃ߮૶↪ߒߥ߆ߞߚ႐วޔή✢ㅢା޽ࠆ޿ߪࡍ࡯ࠬࡔ࡯ࠞ࡯ߥߤߩක≮ᯏߦ᦭ኂߥᐓᷤࠍᒁ߈⿠ߎߔߎߣ߇޽ࠅ߹ߔޕ
Contain FCC ID & IC Numbers
1. Zebra WIFI Radio 802.11b/g
FCC ID : I28-W2WLAN11G
IC ID : 3798B-W2WLAN11G