Filter
Top Products
216 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002
H:
Step 5. Close the printer door.
Step 6. Open the laminator door.
Step 7. Remove the laminate cassette(s). You can leave unused laminate in the cassette(s).
Step 8. Close the laminator door.
Step 9. Place the lower foam insert in the carton.
Step 10. Remove the input hopper and and the output hopper, and set them in the cutouts of
the lower foam insert. Tape the hoppers securely in place.
Step 11. Place the unit in its protective plastic bag.
Step 12. Attach the carrying strap around the unit in the following order:
a. Place loop #1 around the rear of the unit.
b. Place loop #2 around the laminator side of the unit.
c. Place loop #3 around the Card Input and OCP Assembly on the printer side of
the unit.
Note • In the following two illustrations, the protective plastic bag has been omitted for
clarity. Note that the strap loops have been colored (blue, green, and red) for clarity.
12
3