Filter
Top Products
42 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002
2: Installation and Setup
Installing the Windows Printer Driver
Installing the Ethernet (Wired and Wireless) Printer Driver
Step 1. If not already done, connect power to the printer. Turn power ON ( ).
Step 2. Connect the Ethernet port on the rear of the printer to the Ethernet network
connection or directly to the computer’s Ethernet port.
Step 3. Ensure that the Printer’s power switch in the ON ( ) position.
Step 4. Insert the User Documentation and Drivers CD into the CD drive of the host
computer. The Main Menu will open.
Step 5. From the Main Menu, click Install Printer Driver.
Step 6. If an older Printer and Driver is installed on your computer, the Welcome window
will be displayed; otherwise go to Step 8.
Step 7. In the Welcome window, choose the maintenance operation to be performed:
a. Select Modify to upgrade the older printer driver, click the Next button, and
follow the screen prompts. When the Maintenance Complete window
appears, click the Finish button. The upgrade is complete.
b. Select Remove to remove the older printer driver, click the Next button, and
follow the screen prompts. At the end of the uninstall process, you will be
asked to re-boot your computer. Re-boot, and start over with Step 5.
Note • To install the USB driver, see Page 36.
Important • The Ethernet Network must be configured correctly, with the Printer and the
host computer on the same subnet. If you are not sure how to verify this or change the
configuration, consult someone knowledgeable on Ethernet Networks.