Filter
Top Products
158 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002
8: Technical Specifications
Specifications
Electrical
• Single-phase AC power
• Auto-switching Power Supply
• 90V~264V AC RMS and 47-63 HZ (50-60 Hz nominal)
• Power Consumption, Printer only:
Idle 100 W
Printing 150 W
Initializing / Warm-up 300 W
Sleep 20 W
• Power Consumption, Printer + Laminator:
Idle 160 W
Printing 340 W
Initializing / Warm-up 570 W
Sleep 20 W
Physical
• Printer only
Height (with card hoppers) 13.2" (334 mm)
Width (with card hoppers) 18.75" (476 mm)
Depth 20.4" (519 mm)
Weight (printer only) 27.5 lbs (12.5 kg)
• Printer with Laminator
Height (with card hoppers) 13.2" (334 mm)
Width (with card hoppers) 30.75" (781 mm)
Depth 20.4" (519 mm)
Weight 44 lbs (20 kg
Environmental
• Operating Temperature 59º to 95ºF (15º to 35ºC)
• Storage Temperature 23º to 131ºF (-5º to 55ºC)
• Operating Humidity 20% to 80% non-condensing
• Storage Humidity 10% to 90% non-condensing
• Shipping Temperature -40º to 140ºF (-40º to 60ºC)
• Shipping Humidity 10 to 90% non-condensing
Note • Osprey printer setup temperature for composite card top @ 175C & bottom @ 180C,
then laminator setup for both sides lamination @ 140C. Power with 120VAC 60HZ.