56 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002
3: Operation
Operator Control Panel (OCP)
Warning Messages
Warnings alert the operator to action that should be taken; the printer will generally
continue operation.
Error Messages
Errors are displayed when a situation causes the printer to stop operating. Depending on the
cause of the error message, restarting the printer or clearing the displayed error may return the
printer to operational status; or the printer may require troubleshooting and repair.
Refer to Section 7, Troubleshooting, for a list of the error messages, possible causes, and
possible solutions.
WARNING
(Printer will still operate)
DESCRIPTION
BOTH LAMINATES LOW Indicates that the Top Laminate cassette
and the Bottom
Laminate cassette are low.
BOTTOM LAMINATE LOW Indicates that the Bottom Laminate cassette is low; see Loading
the Laminate, Section 2.
CLEAN FEEDER Indicates that the Feeder needs cleaning.
CLEAN FRONT CARD PATH Indicates that the Front Card Path (Y-Drive Rollers) needs
cleaning; see Cleaning the Printer, Section 6.
CLEAN LAM CARD PATH Indicates that the Laminator Card Path needs cleaning; see
Cleaning the Laminator, Section 6.
CLEAN LAM MED ROLLERS Indicates that the Laminator Media Feed Rollers need cleaning;
see Cleaning the Laminator, Section 6.
CLEAN LAM OVEN Indicates that the Laminator Transfer Path (Heated Rollers)
needs cleaning; see Cleaning the Laminator, Section 6.
CLEAN SIDE CARD PATH Indicates that the Side Card Path (X-Drive Rollers) needs
cleaning; see Cleaning the Printer, Section 6.
CLEAN TRANSFER PATH Indicates that the Transfer Path (Heated Rollers) needs
cleaning; see Cleaning the Printer, Section 6.
PRINT RIBBON LOW Indicates that the Print Ribbon spool is low; see Loading a Print
Ribbon, Section 2.
TOP LAMINATE LOW Indicates that the Top Laminate cassette is low; see Loading
the Laminate, Section 2.
TRANSFER FILM LOW Indicates that the Transfer Film spool is low; see Loading the
Transfer Film, Section 2.