Filter
Top Products
44 Z4Mplus/Z6Mplus User Guide 13163L Rev. 3 5/20/2004
Printer Operation
Print a Configuration Label
4. Did the configuration label print correctly?
If the label... Then...
Printed correctly 1. Go to Configuration on page 49.
Did not print or is aligned
improperly
1. Review the following items in the order shown. Do
only as many steps as needed to solve the printing
problem.
•Review Types of Media on page 15 to make sure that
you have the correct type of media for your
application.
•Review Ribbon on page 17. If you are using direct
thermal media, you do not need to use ribbon. If you
are using thermal media, ribbon is required for
printing.
•Review Load Roll Media on page 25 or Load Fanfold
Media on page 38.
• Configure the printer according to the directions given
in Basic Configuration on page 53.
• Check the position of the media sensor and move if
necessary. Follow the directions in Position the Label
Sensor on page 84.