Filter
Top Products
112 Z4Mplus/Z6Mplus User Guide 13163L Rev. 3 5/20/2004
Specifications
Media Specifications
Media Specifications
Table 21 • Z4Mplus and Z6Mplus Media Specifications
Media Specifications Z4Mplus Z6Mplus
Label length Minimum Tear-off 0.5 in. 13 mm 0.5 in. 13 mm
Peel-off 1 in. 25.4 mm 1 in. 25.4 mm
Rewind 0.5 in. 13 mm 0.5 in. 13 mm
Cutter 1 in. 25.4 mm 1.5 in. 38.1 mm
Maximum 39 in. 991 mm 39 in. 991 mm
Label width Minimum 1 in. 25.4 mm 2 in. 51 mm
Maximum Tear/Cutter 4.5 in. 114 mm 7.0 in. 178 mm
Peel/Rewind 4.25 in. 108 mm 6.75 in. 171 mm
Total thickness
(includes liner, if any)
Minimum 0.0023 in. 0.058 mm 0.0023 in. 0.058 mm
Maximum 0.010 in. 0.25 mm 0.010 in. 0.25 mm
Core size 3 in. 76 mm 3 in. 76 mm
Maximum roll diameter 8 in. 203 mm 8 in. 203 mm
Inter-label gap Minimum 0.079 in. 2 mm 0.079 in. 2 mm
Preferred 0.118 in. 3 mm 0.118 in. 3 mm
Maximum 0.157 in. 4 mm 0.157 in. 4 mm
Ticket/tag notch size (width x length) 0.236 in. ×
0.12 in.
6 mm ×
3 mm
0.236 in. ×
0.12 in.
6 mm × 3 mm
Hole diameter 0.125 in. 3 mm 0.125 in. 3 mm
Notch or hole position
(Centered from inner
media edge)
Minimum 0.15 in. 3.8 mm 0.15 in. 3.8
Maximum 2.25 in. 57 mm 3.5 in. 90 mm
Black mark
dimensions
Vertical length 0.98 in. to
0.453 in.
2.5 to
11.5 mm
0.98 in. to
0.453 in.
2.5 to
11.5 mm
Horizontal width > 0.37 in. >
9.5 mm > 0.37 in. > 9.5 mm
Location Within 0.40 in. (1 mm) of inside media edge
May also be centered
from 0.23 to 2.25 in.
(5.84 to 57 mm)
from the media inner edge
May also be centered
from 0.23 to 3.5 in.
(5.84 to 90 mm)
from the media inner edge
Density, in Optical Density Units (UDO) > 1.0 ODU
Maximum media density <
0.5 ODU
Transmissive Sensor Fixed 7/16 in. (11 mm) from inside edge