Filter
Top Products
4 Z4Mplus/Z6Mplus User Guide 13163L Rev. 3 5/20/2004
Introduction
Front Panel
LCD Display Settings
Table 1 shows front panel LCD display settings that you may wish to adjust and what they
mean. Refer to Basic Configuration on page 53 for more detailed information on each setting.
Table 1 • Front Panel LCD Display Settings
LCD Display Meaning/Available Settings
PRINTER READY
Ready to print labels or to configure the printer. All printer self-
tests have been performed successfully.
DARKNESS
The larger the number, the darker the print. The range is 0 to 30,
with a default setting of 10.
PRINT SPEED
The print speed is given in inches per second. The larger the
number, the faster the label prints.
TEAR OFF
Establishes the position of the media over the tear-off bar after
printing.
PRINT MODE
Tear-Off (default setting), Peel-Off, Cutter, Rewind. For more
details, see Table 2.
MEDIA TYPE
Non-continuous (default setting), Continuous
SENSOR TYPE
Web (default setting), Mark
SENSOR SELECT
Auto Select (default setting), Reflective, Transmissive
PRINT METHOD
Thermal transfer (default setting using a ribbon),
Direct thermal (no ribbon)