Filter
Top Products
Routine Care and Adjustments
Cleaning Procedures
13163L Rev. 3 5/20/2004 Z4Mplus/Z6Mplus User Guide 79
Clean the Sensors
Brush or vacuum any accumulated paper lint and dust away from the printer sensors. Refer to
Figure 35. The reflective sensor, transmissive sensor, and ribbon sensor should be cleaned on a
regular basis to ensure proper operation of the printer. For printers with the peel-off, liner
take-up, and/or rewind option(s) installed, clean the take label sensor as well.
Figure 35 • Cleaning the Sensors
1
Transmissive Sensor
2
Reflective Sensor
3
Ribbon Sensor
4
Take-Label Sensor
4
2
1
3