Filter
Top Products
Chapter 12 Filtering
XGS-4526/4528F/4728F User’s Guide
146
Action Select Discard source to drop frames from the source MAC address
(specified in the MAC field). The Switch can still send frames to the MAC
address.
Select Discard destination to drop frames to the destination MAC address
(specified in the MAC address). The Switch can still receive frames
originating from the MAC address.
Select Discard source and Discard destination to block traffic to/from
the MAC address specified in the MAC field.
MAC Type a MAC address in a valid MAC address format, that is, six hexadecimal
character pairs.
VID Type the VLAN group identification number.
Add Click Add to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the Save
link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Clear Click Clear to clear the fields to the factory defaults.
Index This field displays the index number of the rule. Click an index number to
change the settings.
Active This field displays Yes when the rule is activated and No when is it
deactivated.
Name This field displays the descriptive name for this rule. This is for identification
purposes only.
MAC
Address
This field displays the source/destination MAC address with the VLAN
identification number to which the MAC address belongs.
VID This field displays the VLAN group identification number.
Delete Check the rule(s) that you want to remove in the Delete column and then
click the Delete button.
Cancel Click Cancel to clear the selected checkbox(es) in the Delete column.
Table 25 Advanced Application > FIltering (continued)
LABEL DESCRIPTION