Filter
Top Products
Chapter 31 PPPoE
XGS-4526/4528F/4728F User’s Guide
307
31.3.3 PPPoE IA for VLAN
Use this screen to set whether the PPPoE Intermediate Agent is enabled on a VLAN
and whether the Switch appends the Circuit ID and/or Remote ID to PPPoE
discovery packets from a specific VLAN.
Click the VLAN link in the Intermediate Agent screen to display the screen as
shown.
Figure 147 Advanced Application > PPPoE > Intermediate Agent > VLAN
Remote-id Enter a string of up to 63 ASCII characters that the Switch adds into the
Agent Remote ID sub-option for this VLAN on the specified port. Spaces
are allowed.
If you do not specify a string here or in the Remote-id field for a specific
port, the Switch automatically uses the PPPoE client’s MAC address.
The Remote ID you configure here has the highest priority.
Apply Click Apply to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 102 Advanced Application > PPPoE > Intermediate Agent > Port > VLAN
LABEL DESCRIPTION