Filter
Top Products
Chapter 31 PPPoE
XGS-4526/4528F/4728F User’s Guide
306
Click the VLAN link in the Intermediate Agent > Port screen to display the
screen as shown.
Figure 146 Advanced Application > PPPoE > Intermediate Agent > Port > VLAN
The following table describes the labels in this screen.
Table 102 Advanced Application > PPPoE > Intermediate Agent > Port > VLAN
LABEL DESCRIPTION
Show Port Enter a port number to show the PPPoE Intermediate Agent settings for
the specified VLAN(s) on the port.
Show VLAN Use this section to specify the VLANs you want to configure in the section
below.
Start VID Enter the lowest VLAN ID you want to configure in the section below.
End VID Enter the highest VLAN ID you want to configure in the section below.
Apply Click Apply to display the specified range of VLANs in the section below.
Port This field displays the port number specified above.
VID This field displays the VLAN ID of each VLAN in the range specified above.
If you configure the * VLAN, the settings are applied to all VLANs.
* Use this row to make the setting the same for all VLANs. Use this row first
and then make adjustments on a VLAN-by-VLAN basis.
Note: Changes in this row are copied to all the VLANs as soon as
you make them.
Circuit-id Enter a string of up to 63 ASCII characters that the Switch adds into the
Agent Circuit ID sub-option for this VLAN on the specified port. Spaces
are allowed.
The Circuit ID you configure here has the highest priority.