Filter
Top Products
Chapter 6 Tutorials
XGS-4526/4528F/4728F User’s Guide
92
3 Click the Rule Configuration link in the Policy Route screen to create a rule in
this profile.
4 Select the name of the profile with which the rule associates.
Set the rule’s index number to 1 in the Sequence field.
Select Permit to have the Switch send matched traffic to the specified gateway.
Select the name of the layer-3 classifier to which the rule applies.
Enter the IP address of gateway R2 in the Next Hop field (“10.1.2.3” in this
example).
Click Add to save the settings to the run-time memory.
5 Click the Save link in the upper right corner of the web configurator to save your
configuration permanently.