Filter
Top Products
Chapter 4 The Web Configurator
XGS-4526/4528F/4728F User’s Guide
51
VLAN This link takes you to screens where you can configure port-based or
802.1Q VLAN (depending on what you configured in the Switch Setup
menu). You can also configure a protocol based VLAN or a subnet based
VLAN in these screens.
Static MAC
Forwarding
This link takes you to screens where you can configure static MAC
addresses for a port. These static MAC addresses do not age out.
Static
Multicast
Forwarding
This link takes you to a screen where you can configure static multicast
MAC addresses for port(s). These static multicast MAC addresses do not
age out.
Filtering This link takes you to a screen to set up filtering rules.
Spanning Tree
Protocol
This link takes you to screens where you can configure the RSTP/MRSTP/
MSTP to prevent network loops.
Bandwidth
Control
This link takes you to screens where you can cap the maximum
bandwidth allowed on a port.
Broadcast
Storm Control
This link takes you to a screen to set up broadcast filters.
Mirroring This link takes you to screens where you can copy traffic from one port
or ports to another port in order that you can examine the traffic from
the first port without interference.
Link
Aggregation
This link takes you to screen where you can logically aggregate physical
links to form one logical, higher-bandwidth link.
Port
Authentication
This link takes you to a screen where you can configure IEEE 802.1x port
authentication as well as MAC authentication for clients communicating
via the Switch.
Port Security This link takes you to a screen where you can activate MAC address
learning and set the maximum number of MAC addresses to learn on a
port.
Classifier This link takes you to a screen where you can configure the Switch to
group packets based on the specified criteria.
Policy Rule This link takes you to a screen where you can configure the Switch to
perform special treatment on the grouped packets.
Queuing
Method
This link takes you to a screen where you can configure queuing with
associated queue weights for each port.
VLAN Stacking This link takes you to screens where you can activate and configure
VLAN stacking.
Multicast This link takes you to screen where you can configure various multicast
features, IGMP snooping and create multicast VLANs.
AAA This link takes you to a screen where you can configure authentication,
authorization and accounting services via external servers. The external
servers can be either RADIUS (Remote Authentication Dial-In User
Service) or TACACS+ (Terminal Access Controller Access-Control System
Plus).
IP Source
Guard
This link takes you to screens where you can configure filtering of
unauthorized DHCP and ARP packets in your network.
Loop Guard This link takes you to a screen where you can configure protection
against network loops that occur on the edge of your network.
Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION