Filter
Top Products
Chapter 36 RIP
XGS-4526/4528F/4728F User’s Guide
329
Network This field displays the IP interface configured on the Switch.
Refer to the section on IP Setup for more information on configuring IP
domains.
Direction Select the RIP direction from the drop-down list box. Choices are Outgoing,
Incoming, Both and None.
Version Select the RIP version from the drop-down list box. Choices are RIP-1, RIP-
2B and RIP-2M.
Apply Click Apply to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the Save
link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 112 IP Application > RIP (continued)
LABEL DESCRIPTION