Filter
Top Products
Chapter 14 Bandwidth Control
XGS-4526/4528F/4728F User’s Guide
171
Active Select this check box to activate egress rate limits on this port.
Egress Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for
the out-going traffic flow on a port.
Apply Click Apply to save your changes to the Switch’s run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 36 Advanced Application > Bandwidth Control (continued)
LABEL DESCRIPTION