Filter
Top Products
A
SPECIFICATIONS
Hardware
Memory 16 Kb serial EEPROM
128 KB SRAM
315 Cells on chip buffer
Bus interface PCI Local Bus Specification,
Revision 2.0
PCI Compliance Checklist
32-bit zero wait state master
32-bit bus
PCI master Supports up to 13 dword bursts
Supports bus master
scatter-gather DMAs
Memory read line support
Memory read multiple support
PCI slave I/O, memory, and configuration
cycles
Interrupts Interrupt pin: INTA#
LED Lit when there is an active link to
the ATM switch.
Board dimensions Single slot, half-size, 32-bit PCI card
Length: 6.15 in. (15.62 cm)
Width: 4.20 in. (10.67 cm)
Power requirements 10 W (1.5 A @ 5 V, .02 A @ 12V)