Filter
Top Products
4-12 CHAPTER 4: NETWARE SERVER DRIVER INSTALLATION
Maximum Frame Size 1514
4542
9232
All ELANs with the same card number
must have the same MFS value, also
called maximum transfer unit (MTU). Use
1514 for Ethernet, 4542 for 4 Mbps
token ring, and 9232 for 16 Mbps token
ring. Only end stations using the same
value can interoperate.
Rate 1–155 Sets the maximum bandwidth in Mbps
available to an LEC.
LEC Configuration
Mode
Automatic
Manual
Select Automatic for ILMI service. Select
Manual to connect with a specific LECS
or LES.
LECS Network Prefix ATM Forum
Well-known Address
(not shown)
Enter the 13-byte network prefix of the
switch on which the target LECS resides.
LECS User Part 00A03E00000100
(not shown)
Enter the 7-byte user part of the target
LECS address (the ESI plus 00 as the
selector byte).
LES Network Prefix No default Enter the 13-byte network prefix of the
switch on which the target LES resides.
LES User Part No default Enter the 7-byte user part of the target
LES address (the ESI plus 00 as the
selector byte).
Maximum VCCs
Allowed
5–1024 There are 4,096 open VCCs supported
per system (4 NICs per system).
VPI/VCI Range 0 bits/12 bits
1 bits/11 bits
2 bits/10 bits
8 bits/4 bits
This parameter is determined by the ATM
switch setting and must be the same for
all NICs in the system.
ILMI VPI 0 This parameter is determined by the ATM
switch setting.
ILMI VCI 16 This parameter is determined by the ATM
switch setting.
Signaling Version UNI v3.0
UNI v3.1
This parameter is determined by the ATM
switch setting and must be the same for
all NICs in the system.
Table 4-1 3C975 ATMLink NIC NetWare Install Utility Configuration Parameters (cont’d)
Parameter
Range of Values
(Defaults in Bold)
Description