Filter
Top Products
Installing the 3C975 ATMLink NIC 2-3
8 Insert the 3C975 ATMLink NIC in the selected slot, as
shown in Figure 2-2.
Figure 2-2 3C975-F ATMLink NIC Installed in the Chassis
9 Write down the MAC address of the NIC and note which
slot you used.
This information is helpful when installing the network
drivers and connecting the cables to the ATM switch.
The MAC address is the 12-digit hexadecimal number printed
on the small bar code label on the component side of the NIC.
10 Press down gently and firmly on the NIC to seat it properly.
11 Use the screw removed in step 7 to secure the
3C975 ATMLink NIC bracket to the system chassis.
12 Replace the system cover.