Filter
Top Products
3-8 CHAPTER 3: WINDOWS NT DRIVER INSTALLATION
You have completed the ATMLink Windows NT network driver
installation. The remaining sections of this chapter provide a
more detailed approach to installing the ATMLink NIC network
driver with Windows NT.
Installing the Network Driver
The following driver installation procedure is standard to
Windows NT 3.51. The driver can also be installed as part of
the Custom setup procedure supplied with your Windows NT
operating system. Refer to the Microsoft Windows NT
System Guide for additional information.
NIC Detection, Resilient Server Links, and ELAN Allocation
It is assumed that at least one 3C975 ATMLink NIC is installed
in the system PCI bus.
1 Boot your system under Windows NT.
2 Log into your Windows NT Administrator account.
3 Double-click the Control Panel icon.
4 Double-click the Network icon.
The Network Settings window shown in Figure 3-1 appears.
5 Click Add Adapter.
The Add Network Adapter window appears, as shown in
Figure 3-2.
6 Select <Other>Requires disk from manufacturer from the
bottom of the Network Adapter Card list box.
7 Click Continue.
The Insert Disk dialog box appears, as shown in Figure 3-3.