Filter
Top Products
Changing the Test Setup 6-11
Figure 6-8 Test Information Screen
Changing the Test Setup
In rare cases, such as intermittent faults, you may wish to
change the default values of the diagnostic utility. Otherwise,
no changes to defaults are necessary in order to detect the
most common error conditions.
Enabling and Disabling Individual Tests
To enable and disable individual tests, follow these steps:
1 From the diagnostic utility main screen, select Test Setup
from the Test menu.
2 Use the mouse or [Tab] and arrow keys to select any of the
fields within the Test Setup box.
3 Press the [Space Bar] to enable or disable the selected test.
4 When you are satisfied with the new test setup, click OK.
5 To run the tests, choose Run Tests from the Test menu and
click Start.