Filter
Top Products
3-20 CHAPTER 3: WINDOWS NT DRIVER INSTALLATION
Enabling and Disabling ELANs
To disable an ELAN, click the ELAN name in the 3Com ATMLink
Installation window (Figure 3-15), and then click Disable ELAN.
This action disables the protocol bindings of the ELAN. The
button name then changes to Enable ELAN.
To enable an ELAN, click the name of a disabled ELAN and
then click Enable ELAN.
Removing an ELAN
Individual ELANs are removed one at a time.
To remove an ELAN and its associated software drivers from
Windows NT, follow these steps:
1 Double-click the Control Panel icon in the Main group.
The Control Panel window appears.
2 Double-click the Network icon to access the Network Settings
window.
3 Select an ELAN from the Installed Adapter Cards list.
4 Click Remove.
You are prompted to confirm the removal of the component.
5 Click Yes to remove the ELAN.
The request is processed and the Networks Settings window
reappears.
CAUTION: Do not attempt to reinstall the ELAN before
restarting the computer.
6 Click OK in the Network Settings window.
The restart prompt appears.
7 Select Restart Now to reboot the computer.