Filter
Top Products
4-14 CHAPTER 4: NETWARE SERVER DRIVER INSTALLATION
4 Press [F3] to set the frame type.
Use the arrow keys to select a new frame type, if necessary.
The default frame type is 802.2. If you are configuring a
token ring LEC, change the frame type to Token Ring or
Token Ring SNAP as appropriate.
5 Edit the Card Number parameter.
a Use the arrow keys to select the Card Number parameter
and press [Enter].
The dialog box shown in Figure 4-9 appears and lets you
select the card number.
b Select the card number you want and press [Enter].
When multiple ATMLink NICs are installed, you must determine
which physical NIC corresponds to which card number in order
to correctly connect the cables to the ATM switch. See the next
section, “NetWare Card Numbers and Multiple Physical NICs.”
.
Figure 4-9 Selecting the Card Number