Filter
Top Products
Installing the Network Driver 3-11
11 Click Yes if you want the 3Com driver installed on the
indicated NIC. Otherwise, click No.
If you click Yes, the NIC Mode dialog box appears, as shown in
Figure 3-6. If you click No, the NIC Installation dialog box
reappears for the next discovered ATMLink NIC.
To correlate the PCI bus and slot number with a physical NIC,
run the 3Com ATMLink diagnostic utility.
Figure 3-6 NIC Mode Dialog Box
12 Click Active to make the identified NIC an active NIC, or click
Stand-by to make it a standby NIC (resilient server link).
■ If you select Stand-by, the NIC Installation dialog box
reappears for the next discovered 3C975 ATMLink NIC.
■ If you select Active, the Total Number of ELANs dialog box
appears, as shown in Figure 3-7.
Figure 3-7 Total Number of ELANs Dialog Box
13 Enter the number of ELANs you require on the indicated
NIC, and click OK.
The maximum number of ELANs per NIC is 16.