Filter
Top Products
Loading the Server Driver 4-7
If the number of minimum packet receive buffers is already
present in the STARTUP.NCF file, add that number to the
number calculated for the ATMLink NICs.
Driver Installation Procedure
Perform the following steps to install the 3Com 3C975
ATMLink NIC driver on a NetWare 4.x file server:
1 With NetWare 4.x installed and the server up and running,
enter the following command at the prompt:
load install
The Installation Options screen appears, as shown in
Figure 4-1.
Figure 4-1 Installation Options Screen
Use the arrow keys to select an item in any of the NetWare
dialog boxes and then press [Enter].