Filter
Top Products
Adding ELANs 3-23
The preexisting ELANs retain all of their configuration
information. The new ELANs appear in the ELAN portion of the
3Com ATMLink Installation window, as shown in Figure 3-15.
Figure 3-15 3Com ATMLink Installation Window Showing Additional
ELANs
6 Configure the new ELANs, and then click Save & Exit.
7 Click OK in the Networks Setting window.
8 Configure IP information for the new ELANs if IP is used,
and click OK; otherwise, click Cancel.
9 Restart Windows NT.