Filter
Top Products
3-14 C
HAPTER
3: R
OUTING
IP
10
Enter
REM
to establish a new remote management session.
11
Enter
PASSWORD
at the Enter Password screen.
12
Enter
SAVE
to save the new configuration.
Configure the ISDN Numbers Table
Set up the ISDN numbers table to associate the
central site
unit name
with its ISDN number.
1
Enter
CO
IS
NU
to display the ISDN Numbers screen.
2
Enter
ADD
to add an entry to the ISDN Numbers table.
3
Type the name
assigned to the remote unit
in the Name field and the
ISDN number for that unit in the ISDN Number 1 field.
Unit names are case-sensitive and must be entered correctly.
4
Type an IP address of
0.0.0.0
in the IP Address field if unnumbered
links are to be used. Using unnumbered links is recommended for the
most economical use of IP addresses.
5
Type a subnet mask of
0.0.0.0
in the IP Mask field if unnumbered
links are to be used.
6
Type a number between 6 and 10 in the IP Hop Count field.
7
Press [Ctrl]+[E] to submit the new setting and then enter
SAVE
Configure the ISDN Autocall Table
Set up the ISDN Autocall table to associate the
central site
unit IP
address with its name.
1
Enter
CO
IS
AUTO
IP
to display the ISDN IP Autocall Addresses
screen.
2
Enter
ADD
to add an entry to the ISDN IP Autocall table.
3
Type the name of the
central site
unit in the Remote Unit field.
Unit names are case-sensitive and must be entered correctly.
4
Type the IP address of the
central site
unit in the IP Address field.
5
Type the subnet mask of the
central site
network in the IP Mask field.
6
Press [Ctrl]+[E] to submit the new setting and then enter
SAVE
Get_con.bk : ROUT_IP.FRM Page 14 Friday, October 3, 1997 1:49 PM