Filter
Top Products
4-12 C
HAPTER
4: N
OVELL
IPX
AND
B
RIDGING
Make a manual call to the central site.
1
Enter
CO
IS
NU
to display the ISDN Numbers table.
2
Select the entry for the central site unit using the Arrow keys and
enter
CALL
This call is made to allow the unit to receive NRIP and NSAP updates
being advertised by the Novell server at the central site, which are
essential for the IPX Autocall table construction.
Enter
CO
IS
AUTO
IPX
to monitor the construction of the IPX Autocall
table. Press [Ctrl]+[V] at regular intervals to refresh the screen.
The manual call will last for approximately 90 seconds to enable the
unit to receive all of the information which it requires.
3
Enter
CO
IS
NU
to display the ISDN Numbers table.
4
Select the entry for the central site unit and enter
CANC
5
Save the new configuration by entering
SAVE
Nearest Server
The nearest server parameter must be enabled.
1
Enter
CO
IS
AUTO
IPX
to display the ISDN IPX Autocall table.
2
Select the
SAP
entry using the Arrow keys and enter
ED
3
Select the
BRIDGE
PARAMETERS
Nearest
Server
entry using the
[Tab} key and toggle the setting to
ENABLED
using the Spacebar.
4
Press [Ctrl]+[E] to submit the new setting and then enter
SAVE
Disable NRIP/SAP Learning
RIP/SAP learning has to be disabled when the IPX Autocall table has
been constructed.
1
Enter
CO
BR
PA
to display the Filter Parameters screen. Toggle the
Learn Novell RIP/SAP field to
DISABLE
using the Spacebar.
2
Press [Ctrl]+[E] to submit the new setting and then enter
SAVE
Get_con.bk : IPX_BRID.FRM Page 12 Friday, October 3, 1997 1:49 PM