Filter
Top Products
6-44 LAN Interface Supplement
Controlling the Analyzer via the LAN
Controlling the Analyzer using SICL LAN
Configuring Your Analyzer as a SICL LAN
Server
After you have collected the required information from the SICL LAN
client, perform the following steps to set up your analyzer as a SICL LAN
server:
1. Enter the GPIB name
Press
, enter the GPIB name from the SICL LAN client, and
press . Press if you need to replace the
existing entry.
2. Enter the GPIB logical unit number
Press , enter the GPIB logical unit number from the
SICL LAN client, and press .
3. Enter the GPIB device address
Press , enter the GPIB device address from the
SICL LAN client, and press .
If you want to restore the default settings, press .
4. Turn the analyzer off, then on.
Configuring Your PC as a SICL LAN Client
The descriptions here are based on HP’s VISA revision G.02.02, model
number HP2094G. A copy of HP’s VISA can be found on the following
website:
http://www.tm.agilent.com/tmo/software/English/HP_IO_Libraries.
html.
These descriptions assume a LAN connection between your computer
and network analyzer. They are not written for the GPIB-to-LAN
gateway.
1. Install HP VISA revision G.02.02 or higher.
2. Run I/O configuration.
3. Select LAN Client from the Available Interface Types.
4. Press Configure.
SYSTEM OPTIONS
LAN
SICL LAN Setup
GPIB Name
ENTER
Clear Entry
GPIB Log. Unit
ENTER
GPIB Dev. Address
ENTER
Restore Defaults