Filter
Top Products
LAN Interface Supplement 1-13
Connecting and Configuring the Analyzer
Managing User Names and Passwords
Managing User Names and Passwords
Your analyzer implements a limited form of network security using user
name and password pairs. Any remote access of the analyzer, including
Telnet or FTP access, requires a valid user name and associated
password.
A default user name and password pair is set for you prior to shipment:
User Name network
Password analyzer
NOTE You should change this user name and password if you want to use the
security features of the analyzer, since the default user name and
password is the same for all new analyzers, and is therefore public.
Constructing Valid User Names and
Passwords
A valid user name must have 1 to 40 characters. A valid password must
have 8 to 40 characters.
Adding New User Names and Passwords
NOTE You can add up to seven user name/password pairs to the analyzer’s
access list.
Perform the following steps to add a new user name and password to the
access list:
1. Press .
2. Press .
3. Type the user name in the displayed dialog box.
4. Press when you are done.
5. Type the password in the displayed dialog box.
6. Press when you are done.
SYSTEM OPTIONS
LAN
Login User Setup
Add Login User
Enter
Enter