Filter
Top Products
7-12 LAN Interface Supplement
Using the Network File System (NFS)
Setting Up NFS
The following is an example of a valid HOSTS file:
#
#
# This is a sample hosts file
#
#
#
15.4.45.232 host1 # John Doe's workstation
15.4.45.233 host2 # Jane Doe's PC
If you place the above HOSTS file in non-volatile RAM and power cycle
your analyzer, you can use the name host1 to mount an NFS device by
name instead of the IP address 15.4.45.232.
NOTE The HOSTS file is loaded only at power-up. If you add new entries to the
file, you will have to cycle power to the instrument in order for the new
entries to take effect.