Filter
Top Products
LAN Interface Supplement 4-11
Accessing the Analyzer's File System Using FTP
Using GUI FTP Software
9. The file has been transferred to the non-volatile RAM disk on your
analyzer.
10.To drag and drop multiple files, hold down the Ctrl key on your PC
while selecting files with the mouse. When you drag and drop, your
entire selection will be transferred to the analyzer.
11.You can also transfer files from the analyzer to your computer by
dragging files in the other direction.
CAUTION Be sure to use the appropriate file transfer method (binary or ASCII) for
the file(s) you are transferring. If you are transferring files to or from the
analyzer's dynamic data disk, check Table 5-1 on page 5-2 for file types.
NOTE In an ftp session, your analyzer is configured as an ftp server, while your
computer is an ftp client. Your analyzer cannot act as an ftp client. This
means that you cannot type ftp from the analyzer’s prompt. You can
start an ftp session from IBASIC, but that will still configure the
analyzer as the ftp server.