Filter
Top Products
LAN Interface Supplement 7-17
Using the Network File System (NFS)
Setting Up NFS
Copying Files from a Remote NFS Device
Perform the following steps to copy files from a remote NFS device to a
local device:
NOTE Your analyzer does not support file copy from a remote NFS device to
another remote NFS device.
1. Press .
2. Choose an NFS device that you want to copy files from and select it by
pressing the corresponding softkey.
3. Press to use the file utilities menu.
4. Select the file that you want to copy.
5. Press to copy the selected file or [Copy All Files] to copy
all the files in the current directory.
6. Press , , or
to copy the file or files to the desired local
device. A dialog box with the currently selected local device and
selected file name is displayed on top of the screen.
7. Press if the destination device and destination file name is
correct. Otherwise, enter the correct destination file path and press
.
The device name and file name are case-sensitive, and you can
append the file name with either a '/' or '\' between the device name
and the file name.
If you encounter a file access error, make sure that your network and
the remote system are working correctly and that the NFS
authentication IDs are set up correctly.
SAVE RECAL
L
Select Disk
NFS Device
SAVE RECAL
L
File Utilities
Copy File
Copy to NonVol RAM
Copy to Vol RAM
Copy to 3.5” Disk
Enter
Enter