Filter
Top Products
LAN Interface Supplement 4-7
Accessing the Analyzer's File System Using FTP
Using FTP to Access the Analyzer
2. Change to the non-volatile RAM disk in the analyzer by typing
cd nvram at the ftp prompt.
3. If necessary, use the lcd command to change the local directory on
your computer where you want to put the file. For example: type
lcd /users/myname/871x_data.
4. Specify the type of file you will be transferring by typing either
binary or ascii at the ftp prompt.
CAUTION Binary files can be corrupted if you attempt to transfer them in “ascii”
mode. For this example, use binary.
5. Type get state2.sta at the ftp prompt.
6. Type bye at the ftp prompt to exit ftp.
7. Verify the file was copied by listing the contents of the directory it was
copied to.