Filter
Top Products
LAN Interface Supplement 1-19
Connecting and Configuring the Analyzer
Using BOOTP
Figure 1-3 BOOTP Setup Dialog Box
The dialog box shown above displays the following information:
Host Addr the host address of the BOOTP server
IP Addr the analyzer IP address set by BOOTP process
Gateway the analyzer gateway IP address set by the BOOTP
process
Subnet Mask the subnet mask set for the analyzer by the BOOTP
process
File Path the absolute (fully-qualified) path name received
from the BOOTP server, or the [Optional File Path]
if set
Step one shows the network parameters received from the BOOTP
server. To verify that your IBASIC boot file is working correctly,
perform steps two through four.