Filter
Top Products
Installation
Defining a Frequency Plan
Chapter 2
51
Installation
Purging (Deleting) a Frequency Plan File
Frequency plans may be maintained by editing existing files. If there are plans that are
no longer of use, however, you may purge (delete) the files from the SRAM card as
follows:
Step 1. Insert the SRAM memory card with the frequency plan to be purged.
Step 2. From the Lucent AMPS Test Main Menu, select the Calibration/Utilities field. The
Test Software will display the Calibration/Utilities Menu screen.
Step 3. Select the Define Frequency Plan field. The Test Software will display the Define
Frequency Plan screen.
Step 4. Scroll to the Cell Site field, press the knob, and enter the number of the site that
corresponds to the file you wish to delete. To do this, turn the knob to the desired site
number and press the knob to select that number, or use the DATA ENTRY keys to enter
a site number and either press the
Enter key or press the knob to select that number.
Step 5. Press the
k4 (Next Menu) key to access additional file operations.
Step 6. Press the
k2 (Purge) key.
Step 7. The Test Software will display a query asking you to verify the purge operation for the
cell site number entered. Press the
k1 (Yes) key to purge the file.
Step 8. Press the
k5 (Return) key twice to return to the Lucent AMPS Test Main Menu.