Filter
Top Products
10 Agilent FrameScope Pro User’s Manual
1 Introducing the FrameScope Pro
Safety Considerations
Safety Considerations
The following general safety precautions must be observed
during all phases of operation, service, and repair of this
instrument. Failure to comply with these precautions or with
specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the
instrument.
Agilent Technologies Inc. assumes no liability for the customer’s
failure to comply with these requirements.
Before operation, review the instrument and manual, including
the red safety page, for safety markings and instructions. You
must follow these to ensure safe operation and to maintain the
instrument in safe condition.
This instrument is intended for indoor use.
This product is a Safety Class 1 instrument. Product is powered
by an AC/DC adapter.
The protective features of this product may be impaired if it is
used in a manner not specified in the operation instructions.
All Light Emitting Diodes (LEDs) used in this product are Class
1 LEDs as per IEC 60825-1
Environmental conditions
Refer to the Specificatins chapter, Environmental section.
Before applying power
Verify that the product is set to match the available line voltage,
and all the safety precautions are taken.
Do not operate in an explosive atmosphere
Do not operate the instrument in the presence of flammable
gases or fumes
Do not remove the instrument cover
Operating personel must not remove instrument covers.
Component replacement and internal adjustments must be
made only by qualified service personel. Instruments that