Filter
Top Products
120 Agilent FrameScope Pro User’s Manual
4 System Operations
RFC 2544 Test
RFC 2544 Test
Two FrameScopes or One FrameScope and a loopback device,
are needed for RFC 2544 tests: round-trip latency test,
point-to-point throughput test, frame loss rate tests and back to
back tests. One FrameScope is the master and the other is the
slave (if loopback is not selected), which is placed in the
network point under test. The slave FrameScope has to be
pre-set for RFC 2544 tests. For steps on slave FrameScope
settings, see “Setting the slave FrameScope for RFC 2544 Tests”
on page 65.