Filter
Top Products
Network Testing with the FrameScope Pro 2
Performance Tests
Agilent FrameScope Pro User’s Manual 61
4
Optional: If you want to save this RFC 2544 Test suite, or
retrieve a previously stored suite, press the Suite button.
5 The initial setting screen is common for all the RFC testing,
which allows user to enter destination device and password.
The screen is shown below “Slave Setup” on page 62.In the
RFC 2544 Test menu, the remote test device can be either
another FrameScope or any loopback device. If loopback
device is selected, user has two options:
Option 1: User can select IP layer loopback device, where he
needs to specify the IP address or name of the device.
Option 2: User can select MAC layer loopback device,where
mac address of the device needs to be entered.
Similarly for slave FrameScope also there are two options:
Option 1: If you do not know the IP address/name of the slave
FrameScope, select Search for FrameScope.
Create New option: Select
this if you want to save a new
test suite. You will be
prompted to enter a new
name.
Load Selected option: Select
a stored suite from the list.
You can select <Default> if
you want to reload the default
suite.