Filter
Top Products
108 Agilent FrameScope Pro User’s Manual
4 System Operations
Network Settings
Network Settings
The Network Settings screen shows a summary of the network
configuration. This screen may also be accessed by pressing on
the FrameScope icon on the right of the Main Menu. This
includes the following:
The Network Settings screen can be reached by pressing on the
FrameScope Icon on the Main Menu or by pressing System from
the Main Menu and then pressing Network Settings and then
Edit.
The information displayed includes Host Name (FrameScope
Pro name, which by default is FRSCOPE plus the last three hex
bytes of the MAC address, but it can be changed,) MAC address
of the FrameScope Pro (This is a factory setting that identifies
FrameScope uniquely among all Ethernet devices.), information
assigned by DHCP or manually, Network Connection (Auto or
Manual,) and whether Active Discovery and Measure Length are
enabled or disabled. To change any of the settings, press Edit
Settings.
NOTE
For the Network Settings of FrameScope Pro with VoIP Option please refer
to the Voice Testing Chapter page 93