Filter
Top Products
Specifications 6
Electrical
Agilent FrameScope Pro User’s Manual 169
Electrical
Battery A removable rechargeable Lithium (Li Ion)battery
pack typically provides 4-6 hours of operation
between charges, depending on use and power
management settings. The battery has built in
charger, that recharges the Li Ion pack in less than 5
hours. Extra battery packs are available.
Battery pack specification: (Part Number
N2595A-096) 7.4 V dc 3800 mAh
External power Power converter: External ac to dc power converter
(5183-8208) supplies 12 V DC, 1.5 A to the
FrameScope Pro power connector. Power connector
polarity: Positive (+) on the outer sleeve; Negative (-)
on the tip.
Mains supply voltage Must be within 10% of nominal voltage
Installation
overvoltage
Category II
WARNING
Use only the ac adapter supplied in the FrameScope Pro Kit. Using
other power adapters may damage the tester, and will void its
warranty.